FAQs

The best removal method is to scrub off the Trim Coat with a white magic eraser dipped in non-acetone fingernail polish remover. Thoroughly scrub the trim in a circular motion until you bring the trim back to its original state, be sure to keep the magic eraser wet with the non-acetone nail polish remover during the removal process.

We only recommend using this product to restore faded, untreated, unpainted, exterior trim. It's not to be used on interior, new, or plastic window trim.

If the coating is still wet, immediately wipe it off with a dry towel. If the coating has dried, the best method for removal is to use a light polishing compound. We recommend Griot's Garage Correcting Cream, it's a one-step product that requires light buffing to remove moderate paint defects. Follow the buffing instructions provided with any polishing compound used.

We do not recommend trying to touch-up areas, as this product quickly becomes chemically resistant once dry. This product is a one-coat application; more than one coat will have a cloudy appearance.

Ideal environmental conditions for application will be in a shaded area with temperatures between 60°F and 75°F.

We encourage the use of the Trim Coat Restoration Kit within a year of purchase.

We stand by our product and know it can perform when applied correctly. If an issue occurs that is not related to an application error, we are happy to send a replacement kit or provide a full refund.

This is usually related to unintentionally being more thorough on one headlight. Unfortunately, this will require a Repair Kit (complimentary of Cerakote) for the removal of the existing finish using Step 2 Surface Prep Pads and a secondary application of Step 3 Ceramic Clear Coating. Ensure both headlights are evenly sanded, and one Step 3 Ceramic Clear Coating wipe is used per headlight.

If all steps have been thoroughly completed, it's possible the internal surface of the headlight may be oxidized.

Your headlights will appear scuffed and hazy after Step 2 due to the smooth etch you created from the 2000 grit and 3000 grit sanding discs. This smooth etch is crucial for our coating to adhere successfully to the surface.

We do not recommend trying to touch-up areas, as this product quickly becomes chemically resistant once dry. This product is a one-coat application; more than one coat will have a cloudy appearance.

Ideal environmental conditions for application will be in a shaded area with temperatures between 60°F and 75°F.

We encourage the use of the Headlight Restoration Kit within a year of purchase.

We stand by our product and know it can perform when applied correctly. If an issue occurs that is not related to an application error, we are happy to send a replacement kit or provide a full refund.

Rapid Ceramic Paint Sealant is designed specifically for a painted surface; however, Rapid Ceramic Paint Sealant is a water-based ceramic coating and can be applied to many other surfaces and provide its hydrophobic properties while also enhancing the shine of the surface. This includes fiberglass, carbon fiber, gel coat, smooth plastics, etc.

Apply more Rapid Ceramic Paint Sealant and buff with the microfiber rag until the streaks are no longer visible.

You can apply this product over an existing wax, but we recommend applying directly to the paint to achieve optimal results and performance.

This product can be reapplied as needed. If you'd like more gloss and shine, you can apply more Rapid Ceramic and buff with the microfiber rag until you achieve your desired finish.

Rapid Ceramic Paint Sealant will last for several months. However, the longevity of our product depends on the application, weather exposure, how often the vehicle is washed, and or wear/tear of the vehicle.

Rapid Ceramic Paint Sealant can be reapplied when characteristics of the coating have noticeably diminished.

Ideal environmental conditions for application will be in a shaded area with temperatures between 60°F and 75°F.

We encourage the use of the Rapid Ceramic Paint Sealant Kit within a year of purchase.

We stand by our product and know it can perform when applied correctly. If an issue occurs that is not related to an application error, we are happy to send a replacement kit or provide a full refund.

Yes, you can reapply on a clean windshield as needed. However, the glass cleaner wipes are only to be used on the initial application of this product.

Yes, use your washer fluid/wiper system as you usually would.

Rapid Ceramic Glass Coat will last for several months. However, the longevity of our product depends on the application, weather exposure, how often the vehicle is washed, and wear/tear of the vehicle.

Rapid Ceramic Glass Coat can be reapplied to a clean windshield when characteristics of the coating have noticeably diminished.

Ideal environmental conditions for application will be in a shaded area with temperatures between 60°F and 75°F.

We encourage the use of the Rapid Ceramic Glass Coat Kit within a year of purchase.

We stand by our product and know it can perform when applied correctly. If an issue occurs that is not related to an application error, we are happy to send a replacement kit or provide a full refund.