Cerakote Ceramics
Cerakote Headlight Restoration is completed in 3 quick and easy steps, with no power tools required. Cerakote is different than other headlight restoration kits because we manufacture a true professional grade ceramic coating that chemically bonds to the headlights and provides UV protection that stands the test of time.
See our application video and step by step instructions here
Amazing! Really works great!
The product supplies enough wipes to get all the oxidation off of the headlights before the next step of sanding.
The product seemed to work well for cleaning headlights, but I don't think they will remain clear for long. After cleaning lights and opened the ceramic coating wipes they were dried out. I waited for several month's before using this product, but nothing was opened until I cleaned up the lights. Very disappointing after seeing all the positive reviews to not be able to even use half of the product. Also now my lights have no protection on them unless I buy another product
follow the directions and it works. not sure how long this will last before I have to do it again. So far so good.
Works great
I highly recommend this product, my headlights have been restored to NEW. I do have a few suggestions, these are merely my opinion, and I received fantastic results. 1. Tape off your headlights if you are sanding with the headlights installed. 2. During the sanding process, TAKE YOUR TIME. Personally, I would recommend longer than 3 minutes of sanding per grit. The result you end up with, in my opinion, is dependent on how well you sand. 3. I utilized a spray bottle with a few drops of dishwashing soap. 4. I sanded in 4 directions for each grit: -Top to Bottom -Left to Right -Bottom to Top -Right to Left Keep the headlight wet as well as the sandpaper 5. Wipe the headlight down and make sure you have sanded "properly" 6. Allow to dry completely 7. When utilizing the final step wipe, do not unfold and leave as is. Wipe in one direction, making sure to overlap a bit with each wipe and PLEASE DO NOT GO BACK OVER IT. You just need ONE coat. 8. I let mine dry overnight, they look darn near NEW. The video from the QR code is helpful, but I recommend taping, sanding in all directions and letting the headlights dry for at least 8 hours. Customer service was also super helpful. I don't recommend many products, but this one is a winner. I cannot speak for longevity, but there is a limited lifetime warranty and as I wrote earlier, customer service was fantastic.
Amazing! Really works great!
The product supplies enough wipes to get all the oxidation off of the headlights before the next step of sanding.
The product seemed to work well for cleaning headlights, but I don't think they will remain clear for long. After cleaning lights and opened the ceramic coating wipes they were dried out. I waited for several month's before using this product, but nothing was opened until I cleaned up the lights. Very disappointing after seeing all the positive reviews to not be able to even use half of the product. Also now my lights have no protection on them unless I buy another product
follow the directions and it works. not sure how long this will last before I have to do it again. So far so good.
Works great
I highly recommend this product, my headlights have been restored to NEW. I do have a few suggestions, these are merely my opinion, and I received fantastic results. 1. Tape off your headlights if you are sanding with the headlights installed. 2. During the sanding process, TAKE YOUR TIME. Personally, I would recommend longer than 3 minutes of sanding per grit. The result you end up with, in my opinion, is dependent on how well you sand. 3. I utilized a spray bottle with a few drops of dishwashing soap. 4. I sanded in 4 directions for each grit: -Top to Bottom -Left to Right -Bottom to Top -Right to Left Keep the headlight wet as well as the sandpaper 5. Wipe the headlight down and make sure you have sanded "properly" 6. Allow to dry completely 7. When utilizing the final step wipe, do not unfold and leave as is. Wipe in one direction, making sure to overlap a bit with each wipe and PLEASE DO NOT GO BACK OVER IT. You just need ONE coat. 8. I let mine dry overnight, they look darn near NEW. The video from the QR code is helpful, but I recommend taping, sanding in all directions and letting the headlights dry for at least 8 hours. Customer service was also super helpful. I don't recommend many products, but this one is a winner. I cannot speak for longevity, but there is a limited lifetime warranty and as I wrote earlier, customer service was fantastic.
Cerakote Ceramics